Brother CM550DX Uživatelský manuál stáhnout pdf

Basic Quilting Guide

– Making a Quilt –

c Fabric ............................................... We recommend 100% cotton that is not too thick.

c Quilt batting ..................................... Normally, medium-thick 100% polyester batting is used.

There is also cotton batting.

c Thread .............................................. Since there are various types, for example, for piecing, for

quilting, for hand-sewing and for machine-sewing, select

the type appropriate for the desired purpose and use.

c Sewing needles/pins.......................... Since there are various types, for example, for piecing

and for quilting, select the type appropriate for the

desired purpose.

c Quilting pencil (erasable pen, etc.) ... Use to copy patterns onto fabric and to draw quilting

lines.

c Thimble ............................................ Use to protect your fingers when

quilting.

Place a thimble on the middle

finger of your right hand to push

the needle and on the middle or

index finger of your left hand to

stop the needle.

c Quilting hoop ................................... Use the hoop for quilting with a

cleaner finish.

c Thread clipper

c Iron/press

c Measuring stick

1 Preparing Materials and Equipment

1 2 3 4 5 6 ... 11 12

Shrnutí obsahu

Strany 1 - – Making a Quilt –

1Basic Quilting Guide– Making a Quilt –c Fabric ... We recommend 100% cotton that is not too thick.c Quil

Strany 2 - 2 Cutting Pieces (Fabric)

10After quilting, cover the edges with bias tape to finish them.Make bias tape with a finished width of 7 mm (1/4 inch).Draw a 35-mm-wide (1-3/8 inche

Strany 3 - Running stitch

114In the same way, sew all along the edges and return to the folded back end of the bias tape. Cut off any excess bias tape.1 Overlap the fold.2 Exc

Strany 4

XF5444-0011English891-Z01Printed in China

Strany 5 - Sewing method

2Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam allowance and draw the pattern lines, and then cut out the pieces. Be su

Strany 6 - Sewing appliqués

3Memo● If you are using a sewing machine to make the quilt, refer to your machine’s instruction manual for information about the straight stitch, rev

Strany 7 - 5 Drawing Quilting Lines

4When sewing pieces together, sew to the corner of the stitching line.1Sew the pieces together. At the beginning of stitching, make a knot in the thre

Strany 8 - 6 Basting

5Using two types of fabric, prepare 4 square pieces from one and 5 from the other. (Refer to the illustration below.)Cut the pieces with a seam allow

Strany 9 - 7Quilting

6<Finished design>1Cut the appliqué pieces with a seam allowance applied. (Example: 4 hearts)2Make cuts 1 mm (1/16 inch) from the stitching line

Strany 10 - Connecting bias tape sections

7After the top (patchwork) is finished, draw the quilting lines.Use a quilting pencil or erasable pen to lightly draw the lines.Draw with a light col

Strany 11

8After drawing the quilting lines, overlap the backing fabric, quilt batting and top (patchwork), in order, and then baste them together.1Prepare quil

Strany 12 - Printed in China

9From the center to the outside, sew symmetrically in the order shown in the illustration.1 Beginning of stitching1Insert the needle a short distance