Brother HL-600 Series Průvodce nastavením stáhnout pdf

Brother Laser Printer HL-600 Series Quick Setup Guide

Read this guidebook first to set up your printer.

Action 1: Getting Started

Check the Supplied Items

After taking the printer out of the carton and removing the packing materials, make sure that

the following items are not damaged and none are missing:

• Printer • Multi-purpose sheet feeder

• Drum unit • Toner cartridge

• 3.5” floppy disks for DOS/Windows

• Software setup guide

• Quick setup guide (this guidebook)

• User’s guide

• Plastic Bag

NOTE

The 3.5” floppy disks for the Macintosh printer driver is included in some countries.

You will need to purchase an interface cable that matches the interface of your computer. If

you do not know what cable you need, consult your dealer.

The product names in this guidebook are trademarks or registered trademarks of each manufacturer. The specifications are subject to change without notice.

UL5455001 C Printed in Japan

1 2 3 4 5 6 7 8

Action 1: Getting Started 1

Shrnutí obsahu

Strany 1 - Action 1: Getting Started

1Brother Laser Printer HL-600 Series Quick Setup GuideRead this guidebook first to set up your printer.Action 1: Getting StartedCheck the Supplied Ite

Strany 2

2Action 2: Install the Toner Cartridge / Drum Unit1Unpack the drum unit and gently rock itfrom side to side five or six times.2Remove the protective p

Strany 3

35Unpack the toner cartridge and gently rockit from side to side five or six times beforeinstalling. ( ① )Then, remove the protective parts.( ② )CAUTI

Strany 4

4Action 3: Load Paper into Your Printer1Install the paper support into the multi-purpose sheet feeder. (①)Install the sheet feeder into the printer. (

Strany 5

55Close the multi-purpose sheet feeder cover.6Open the output tray. ( ① )Extend the paper support wire. ( ② )The printer can handle paper that has th

Strany 6

6Action 4: Connect Your Printer and ComputerYou must connect the printer to your computer using an interface cable. A parallel cable isused for this c

Strany 7

7Action 5: Plug in and Turn on Your Printer1Plug the power cord into the AC poweroutlet.NOTEThis printer has no power switch. Theprinter has a sleep m

Strany 8

8Shipment of the PrinterIf for any reason you must ship your Printer, carefully package thePrinter to avoid any damage during transit. It is recommend