
Quick Setup GuideDCP-110CBefore you can use the machine, you must set up the hardware and install the driver.Please read this “Quick Setup Guide” for
8Setting Up the Machine5If all lines are clear and visible, press ▲ to finish the quality check.---OR---If you can see missing short lines, press ▼ an
9Setting Upthe MachineWindows®Mac OS® 8.6 - 9.2Mac OS® XSetting the date and time allows the machine to clean the print head regularly and maintain op
10Installing the Driver & SoftwareThe CD-ROM includes the following items:Install MFL-Pro SuiteYou can install the MFL-Pro Suite software and mult
11Setting Upthe MachineWindows®Mac OS®8.6 - 9.2Mac OS® XInstalling the Driver & SoftwareFollow the instructions on this page for your operating sy
12Installing the Driver & SoftwareMake sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 9.If you ar
135After reading and accepting the ScanSoft® PaperPort® 9.0SE License Agreement, click Yes.6The installation of PaperPort® 9.0SE will automatically st
14Installing the Driver & Software0Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner co
15Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 9.1Disconnect the machine from the AC outlet an
16Installing the Driver & Software8Lift the scanner cover to release the lock. Gently push the scanner cover support down and close the scanner co
17Make sure that you have completed the instructions from Step 1 “Setting Up the Machine” on pages 4 - 9.1Disconnect the machine from the AC outlet an
Warning Hint User’s GuideIndicates warnings that must be observed to prevent possible personal injury.Indicates cautions that must be observed to use
18Installing the Driver & Software3. Carefully route the USB cable through the trench and out the back of the machine as shown below.WarningEnsure
19ESelect USB.FSelect DCP-110C and then click Add.GSelect Quit Printer Setup Utility from the Printer Setup Utility menu.The MFL-Pro Suite, Brother Pr
20Ink CartridgeThe external wireless Print/Scan server (802.11b) is available for Brother DCP’s as an option.Replacement ConsumablesBlack Magenta Yell
TrademarksThe Brother logo is a registered trademark of Brother Industries, Ltd.Brother is a registered trademark of Brother Industries, Ltd.Multi-Fun
1Carton components may differ from one country to another.Save all packing materials and the carton.Carton ComponentsQuick Setup GuideUser’s GuideAcce
2Control Panel1. Copy keys 5. Start keys 9. PhotoCapture key2. Set key 6. On/Off key 10. Menu key3. Navigation keys 7. Ink key 11. Liquid Crystal Disp
3Table of ContentsSetting Up the Machine1. Removing the Protective Parts ... 42.
4Setting Up the Machine1Remove the protective tape.DO NOT connect the USB cable. Connecting the USB cable is done when installing the driver.1Pull the
5Setting Upthe MachineWindows®Mac OS® 8.6 - 9.2Mac OS® X1Connect the power cord.DO NOT connect the USB cable yet.WarningThe DCP must be connected to a
6Setting Up the Machine3Remove the protective parts.4Take out the ink cartridge.5Carefully remove the bottom cap.DO NOT touch the area shown in the il
7Setting Upthe MachineWindows®Mac OS® 8.6 - 9.2Mac OS® X• DO NOT remove ink cartridges if you do not need to replace them. If you do so, it may reduce
Komentáře k této Příručce