Brother NC-9100H Uživatelský manuál stáhnout pdf

Network (LAN) board

When you add the optional Network (LAN) Board (NC-9100h), you

can connect your MFC into the network to use the Internet FAX,

Network Scanner, Network Printer and Network Management

operations.

WARNING

DO NOT touch the surface of the main board within 15 minutes after

turning off the power.

For more details about how to configure the Network board, please

see the NC-9100h Network User's Guide on the CD-ROM supplied

with the MFC.

NC-9100h

Print/Fax Server

1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - Network (LAN) board

1 Network (LAN) boardWhen you add the optional Network (LAN) Board (NC-9100h), you can connect your MFC into the network to use the Internet FAX, Netw

Strany 2 - Before starting installation

2 Before starting installationBe careful when handling the NC-9100h. There are many delicate electronic components that are susceptible to damage fr

Strany 3 - Step 1: Hardware installation

3Step 1: Hardware installationWARNINGDO NOT touch the surface of the main boards within 15 minutes after turning off the power.1Disconnect the telepho

Strany 4 - Cover Plate

4 3Loosen the two screws, and then remove the metal cover plate.4Plug the NC-9100h into connector P1 located on the main board as shown in the illu

Strany 5 - 100BASE-TX Ethernet Network

5Step 2: Connecting the NC-9100h to an Unshielded Twisted Pair 10BASE-T or 100BASE-TX Ethernet NetworkTo connect the NC-9100h to a 10BASE-T or 100BAS

Strany 6 - TEST SWITCH

6 Active LED is yellow:The Active LED will blink if the print server is receiving or transmitting data.TEST SWITCHShort push: Prints the network co